Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8478604
- Product Categories
- Friendly Links
Information Name: | Supply Thomas THO4054-3 Epoxy resin dry-type transformers temperature sealant |
Published: | 2011-11-16 |
Validity: | 180 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Name Thomas temperature epoxy resin dry-type transformer encapsulants (THO4054-III) Overview of the strains of modified epoxy resin adhesive viscosity, room temperature curing of the series, their mobility, color, temperature, etc. can be properly adjusted, after curing, the surface smooth and bright, no bubbles. Two component, room temperature fast curing, high adhesion strength, mobility, and easy to operate. Scope for dry-type transformers products enable electronic components, chips, etc. play a perfusion-turn coil seal, insulation, moisture shock effect. Sex Can Special Point ? Appearance: A component for the paste body, no solid particles. Group B were as pale yellow liquid. At 25 ℃, 1-3 hours early cure, 18 hours close to the maximum bond strength. ? High bonding strength, durability, UV resistance and excellent performance. ? heat resistance, and adapt to a wide range of temperatures, low shrinkage and a greater resistance to high temperature range. ? adhesive surface is not strictly, the two groups were in proportion to deploy, easy to use. ? excellent resistance to media, oil, water, acid, kerosene, ethanol, nuclear, neutron radiation. ? Safety and toxicity characteristics: a very slight smell, no inhalation hazard, actual non-toxic after curing. ? good storage stability, shelf life is 18 months. The main technical performance indicators are as follows: temperature range: -52 - +180 ℃ Volume resistivity 25 ℃ 1 × 1015Ω.cm surface resistance of 2.5 × 1015Ω Dielectric 20-25kV/mm hardness shore D 68 Shrinkage 1.5 Water absorption 24h <0.1% the glass transition temperature of 180 ℃ Bond strength: room temperature: Tensile strength ≥ 25MPa; shear strength ≥ 20 Mpa 150 ℃: 5-5.5 MPa tensile strength Use 1, will be sticky rust, dirt, wipe. 2, A, B groups were the proportion of full and mix thoroughly by 10:1-1.2. Evenly applied to the adhesive surface. 3, is tuned to the glue applied to the surface was encapsulated components, put it aside for 2 to 4 hours. Note 1, take the plastic tools must not be mixed. 2, glue such as contact with skin, wash with soap and water can be timely. 3, the operating environment, attention to ventilation, unused plastic should be covered and placed in a cool ventilated place. The copyright belongs to all of Chengdu Thomas Technology 2005-2011 |
Admin>>>
You are the 8206 visitor
Copyright © GuangDong ICP No. 10089450, Thomas Technology Co., Ltd. Chengdu All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 8206 visitor
Copyright © GuangDong ICP No. 10089450, Thomas Technology Co., Ltd. Chengdu All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility