Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8478604
- Product Categories
- Friendly Links
Information Name: | Thomas THO4057 supply high temperature plastic with fiberglass |
Published: | 2011-11-16 |
Validity: | 180 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Name Thomas fiberglass with high temperature plastic (THO4057) Overview of the strains of modified epoxy adhesives, two component, room temperature fast curing, high adhesion strength, good temperature resistance, strong adhesion, superior structural performance, easy operation. Apply Scope for work under conditions of high temperature silicate blended composite of self-adhesive and stick each other and surface coating, and mixing of materials suitable for the production of glass fiber reinforced plastic, glass, fiber bonding, filling, sealing, and plugging repair. Sex Can Special Point ? Appearance: A light-colored viscous liquid component, no solid particles. Group B were mixed as light yellow viscous liquid. ? Fast cure, 25 ℃, 1-3 hours early, when cure, 18 hours close to the maximum bond strength. To 80 - 100 ℃ oven heat 45 to 60 minutes completely cured. ? High bonding strength, toughness, durability, UV resistance and excellent performance. ? temperature performance to meet the wide temperature range, after bonding at high temperatures is still a good bonding results. ? medium viscosity glue, no bubbles, good leveling properties, good surface finish after curing. ? adhesive surface is not strictly, the two groups were in proportion to deploy, easy to use. ? excellent resistance to media, oil, water, acid, kerosene, alcohol, alkali, heterocyclic hydrocarbons, nuclear radiation. ? Safety and toxicity characteristics: a very slight smell, no inhalation hazard, actual non-toxic after curing. ? good storage stability, storage period of 18 months. The main technical performance indicators are as follows: temperature range: -45 - +400 ℃ Room temperature: Tensile strength ≥ 25MPa; shear strength ≥ 20 MPa; 150 ℃: tensile strength 3-5 MPa Use Method 1 will be sticky rust, dirt, wipe. 2, A, B component and mix thoroughly by 10:1.2-1.5 proportion of the full, uniform sizing. 3, is tuned to the glue applied to the adherend surface, close up, compaction, standing 2 to 4 hours. 4, if necessary, after the coated glass fiber forming, you need to glue coating material such as the glue in the initial post-curing time, hot or cold forming. Note Items 1, can not take the plastic tool mix. 2, the operating environment ventilation. 3, glue such as contact with skin, wash with soap and water can be timely. 4, unused plastic should be covered and placed in a cool ventilated place. The copyright belongs to all of Chengdu Thomas Technology 2005-2011 |
Admin>>>
You are the 8206 visitor
Copyright © GuangDong ICP No. 10089450, Thomas Technology Co., Ltd. Chengdu All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 8206 visitor
Copyright © GuangDong ICP No. 10089450, Thomas Technology Co., Ltd. Chengdu All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility