Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8478604
- Product Categories
- Friendly Links
Information Name: | Thomas radiator repair water supply sealant |
Published: | 2011-11-16 |
Validity: | 30 |
Specifications: | 1kg/5kg |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | High-strength structural adhesive product names Thomas (THO511-1) Overview This product is a double-modified epoxy structural adhesive, two-component, room temperature or heat curing, the product of high gloss, toughness, resistance to thermal shock, wide, easy to use. Scope for PVC board / skin, polystyrene, aramid, ABS, silicone rubber, polyurethane, silicone rubber, fluorine plastic self-adhesive and stick each other, can also be used for plastic and metal, stone wood adhesive . Features ? Appearance: A component of multi-colored viscous liquid. Part B is a colorless water-like liquid. ? Curing: 25 ℃ when, 24h initial curing, 2D maximum intensity after. Such as heat-cure: 80 ℃ 8 小时 125 ℃ 2 小时 ? Adhesive strength, toughness, durability, resistance to ultraviolet radiation is good. ? Resistance to media performance, oil, water, acid, alkali and alcohol organic solvents. ? Good storage stability, room temperature storage period of 1.5 years. ? Safety and toxicity profiles: a slight odor, no inhalation hazard, nontoxic glue cured. The main technical performance indicators are as follows: Temperature range: -40 ℃ - +220 ℃ (PU / galvanized sheet) material damage Bond strength: room temperature peel strength ≥ 29kn / m; shear strength ≥ 18.5MPa Use 1, will be the adhesive surface roughening, cleaning wipe. 2, A, B the ratio of plastic to fully mix thoroughly by 30:10-12. 3, tuned to the two glue evenly on the surface to be bonded, folded properly give pressure compaction, put it aside at room temperature curing or heat curing. Note 1, B to adjust the amount of glue, can change the curing rate, A, B gel adjusted within the range in 30:10-12, B glue more, curing speed, whereas slow. 2, the temperature influence on the curing rate of the general high temperature, curing speed; low temperature curing slowly. 3, a good tune glue application period at 25 ℃, 3h, and therefore the amount of disposable plastic transfer can be achieved one kilogram or more. 4, take plastic tool can not be mixed. Glue, such as contact with skin, wash with soap and water can be timely. 5, the site where ventilation. This product should be stored in a cool ventilated place. The copyright belongs to the Chengdu Science and Technology 2005-2011 All Thomas |
Admin>>>
You are the 8206 visitor
Copyright © GuangDong ICP No. 10089450, Thomas Technology Co., Ltd. Chengdu All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 8206 visitor
Copyright © GuangDong ICP No. 10089450, Thomas Technology Co., Ltd. Chengdu All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility