Product Name Thomas Damp high-temperature plastic (THO4095-II) 
 Overview of system modified adhesive, heat curing, after curing the surface smooth and bright, no bubbles. Fast curing, high bonding strength, good fluidity, easy to operate. 
 Scope of application of high voltage diodes, transistors, resistors, capacitors, motors, transformers, coils, large-scale integrated circuit (IC) optical precision instruments and other surface infiltration and Official Reply, coating, and encapsulating the chip sealed deep in outdoor and wet or underwater work environment and other processes. Also applies to metals and ceramics, alloys, glass, transparent composite materials (non-metallic materials) and mutual self-adhesive sticky and wet after the outdoor work environment or underwater craft. 
 Features 
 Viscous liquid. (Adjustable multi-color and multi-color viscosity viscosity) 
 ? Curing speed, 120 ℃ heat, 1 minute completely cured. 
 ? Adhesive strength, toughness, impact resistance and durability. 
 ? Heat resistance, air resistance, low shrinkage. 
 ? Temperature performance, adapt to the wide temperature range, after bonding at higher temperatures is still a good bonding results. 
 ? Glue viscosity is moderate, no bubbles, good leveling properties, good surface finish after curing. 
 ? Bonding surface is not strictly deal with, easy to use. 
 ? Resistance to media performance, oil, water, acid, kerosene, alkali, radiation. 
 ? Safety and toxicity characteristics: a very slight smell, no inhalation hazard, the actual non-toxic. Products meet the ROHS standard instructions. 
 ? A good storage stability, the storage period of 12 months. 
 The main technical performance indicators are as follows: temperature range: -50 - +325 ℃ 
 100 ℃, RH100%, 3000h, remove the test values: hardness shore D 85 
 Tensile strength: 35MPa 65MPa bending strength of 175 MPa compressive strength 
 Toughness 17KJ / m * m shear strength 26.8 MP (25 ℃) 13.4MPa (200 ℃) 
 Use 
 1, decontamination, wipe. 
 2, the glue thin and evenly sprayed on the surface to be bonded, and then paste the merger was a little external help 
 Bonding material does not move and remove air bubbles, put it aside. Heating temperature to 120 ℃, 1 minute 
 Completely cured. 
 Note 
 1, when attention to ventilation. 
 2, glue, such as contact with skin, wash with soap and water can be timely. 
 3, unused plastic cover should be placed in a cool well-ventilated place. 
 The copyright belongs to the Chengdu Science and Technology 2005-2011 All Thomas